This cutting board was made with a custom logo.
The board is laminated maple and the logo was provided by my customer. I traced it into Carbide Create and created two toolpaths for the CNC machine.
The first toolpath was a simple pocket cut with a 1/8 in downcut endmill. I only took it down 0.5 mm. The second cut was an advanced V-carve with a 90 degree V-bit and it went around the outside of the logo cutting to a maximum depth of 1.3 mm. It added a nice edge. Finished with my mineral oil and beeswax mixture. The customer was happy with it and that’s what counts!